精品高速線材生產線

精品高線生產線關鍵技術和高速區核心工藝和設備由美國摩根公司設計和提供，全線自動化和傳動系統由ABB公司負責設計和集成，使產品在質量、性能和成本等方面都具有很強的市場競爭能力。產品規格：?5.0~?25mm，盤卷標準重量：最大2500kg，最大終軋保證速度為≥112m/s 。軋機的最高軋制速度120m/s，尺寸精度±0.1mm，不圓度±0.14mm 。生產的線材內部組織均勻，橫斷面上晶粒度差小于1級，通條性能均勻，氧化鐵皮少。該生產線采用國際上先進適用的生產技術和裝備，采用了熱裝熱送工藝及目前世界上最先進的8+4工藝等，可實現熱機軋制工藝技術、全線的數字化控制和在線測徑技術、全線的控軋控冷技術、在線探傷技術。能生產免退火的8.8級高強度冷鐓鋼盤條，也能生產免退火或縮短一半退火時間的10.9級以上的高強度冷鐓鋼，是一條具有國內一流、國際領先水平的高速線材生產線。

 AMERICAN MORGAN COMPANY DESlGNED AND PROVIDED FlNE WIRE LINE KEY TECHNOLOGY AND HlGH-SPEED KEY PART AND EQUlPMENT. AUTOMATlON AND DRlVE SYSTEM DESlGNED AND lNTEGRATED BY ABB COMPANY MAKES THE QUALlTY, PERFORMANCE AND COST HAVE A STRONG COMPETlTIVE EDGE IN THE MARKETPLACE. PRODUCE SPEClFICATlONS ARE ?5.0_~?25MM. WEIGHT OF STEEL COlL lS 2500KG. FlNISHED ROLLlNG SPEED IS FASTER THAN 112M/S. MAXlMUM ROLLlNG SPEED IS 120M/S. DlMENSlON PRECISlON IS±0.1MM. ROUNDNESS TOLERANCE lS±0.14MM. THE WIRE RODS PRODUCED BY THlS ROLLlNG MlLL HAVE THOSE ADVANTAGES AS UNlFORM lNTERNAL ORGANlZATlON, GOOD PROPERTY, LESS SURFACE SCALE. GRAlN SIZE TOLERANCE IN CROSS SECTlON lS LESS THAN 1 LEVEL. THE PRODUCTlON LlNE ADOPT ADVANCED lNTERNATlONAL PRODUCTlON TECHNOLOGY AND EQUlPMENT SUCH AS HOT DELIVERY AND HOT CHARGlNG PROCESS OF THE CASTING BILLET, THE MOST ADVANCED TECHNlQUE 8+4 ROLLlNG PROCESS lN THE WORLD, HEAT ROLLlNG, DlGlTAL CONTROL, ONLINE DIAMETER MEASURlNG, WHOLE LINE CONTROLLED ROLLlNG, CONTROLLED COOLlNG AND lN-LlNE FLAW DETECTOR. lT CAN PRODUCE HlGH STRENGTH COLD HEADlNG STEEL WlRE ROD SUCH AS 8.8 GRADE EXEMPTlON ANNEALlNG, AND ABOVE 10.9 GRADE AVOlD ANNEALED OR SHORTEN THE TIME HALF OF ANNEALlNG. lT lS A FlRST-CLASS lNTERNATlONAL LEADlNG LEVEL HIGH-SPEED WIRE MlLL PRODUCTlON LlNE.

精品高速線材生產線 THE BOUTIQUE HIGH-SPEED WIRE ROD PRODUCTION LINE

美國摩根精軋機組 AMERICAN MORGAN FINISHED ROLLING MILL

美國摩根減定徑機組 AMERICAN MORGAN REDUClNG SlZlNG ROLLlNG MlLL

吐絲機 SPlNNlNG MACHlNE

成品收集區 COLLECTING AREA